Pneumatics Units & Fittings
- Home
- Pneumatics Units & Fittings
Air source treatment unit
Air source treatment units (air treatment components) are pneumatic components for filtering, regulating, lubricating the compressed air, it including air filter, air regulator, lubricator,drains, etc.
Control components
Pneumatic control components are important components for controlling and regulating the pressure, flow, flow direction and transmission signals of compressed air.
Executive components
Pneumatic Executive components are the components for controlling the controlled object according to the control information. It can convert electric energy or fluid energy into mechanical energy or other forms
Auxiliary components
Pneumatic auxiliary components(such as fittings, silencer, PU tube etc.) are necessary components to ensure the purification of compressed air, lubrication of components, connection between components and noise elimination.
Pneumatic Fittings
The products on this catalogue are designed for use in compressed air systems (including vacuum systems). If the pressure and temperature exceed the range of product specification, it will lead to poor pneumatic components or damage. Please be aware of the product specifications and use them accordingly.
If you are using fluid besides compressed air (including vacuum), please contact our company on the basis of reading and understanding the contents of the instructions, installation and use of the product! Meanwhile, keep the product in a good condition, so that we can use it any time.
Installation
- On the basis of reading and understanding the contents of the instructions, then installation and use the product. In the meanwhile, keep the product in good condition, so that we can use it at any time.
- Be sure to maintain the necessary space for inspection.
- When installing,press the recommended torque to tighten the threads.
Gas source
- The working medium is compressed air. Use fluid besides compressed air.please contact with our company. For fluids that use a common fluid the fluid that may be used should beconfirmed by our company.
- Compressed air containing a lot of condensate, will cause pneumatic components not work well, air filters shall be installed before the air dryer and condensate collector.
- Once the condensed water in the air filter is forgotten, the condensate will flow to the outlet side, causing the pneumatic components to malfunction. Discharge of condensate management work difficult situation, hope to use automatic drainage with air filter, For details of the quality of compressed air, please refer to our company compressed air purification system.
- In compressed air, if it is containing chemicals, organic solvents synthetic oil, salts, corrosive gases, etc. it may cause malfunction or damage to pneumatic components. pls do not use.
Piping
- Piping before work Should be fully blown or wash the tube at the end of cutting, cutting oil, dust and so on
- Sealing tape winding method, piping and pipe fittings are threaded. Do not allow piping threads and seal taps to be mixed into piping.
When using a sealing tape, the front end or the threaded part should be left with 1.5-2 pitch non-wound sealing tape.
Piping
- Do not use in places with corrosive gases, chemicals, seawater, water and water vapor or in places where the above substances are listed.
- Direct sunlight should not be allowed
- Do not use in the place which will create vibration or shocks
- Do not use hot places around the Radiant heat
Maintenance
- Once used in errors, will lead to the operation of components and devices bad or damaged.
- Once the compressed air is used in errors, it is dangerous. Be comply with products specifications. The work of replace the filter element and other maintenance, please carry on after having sufficient knowledge and experience in pneumatic components.
- Air filters, etc shall discharge the condensate in regular time.
- Before removing the product, the power must be switched off, the air supply stopped, the compressed air from the piping has run out of all, and confirm it has in air situation.
- Installation, repair, transformation, access to air and power, check the appropriate function and leak. If you hear a leak or component action is not normal, do not use. Be sure to confirm that the installation is correct before use.
- It is forbidden to decompose and modify the component body part.